A failed Face ID attempt should normally prompt another authentication attempt, but some iPhone 18 Pro owners reported that their phones froze and restarted after a failed Face ID attempt on iOS 27.
Apple released iOS 27.0.1 on Sept. 28 to address that problem along with two other bugs. The update is primarily a bug-fix release rather than a major feature update.
The Face ID issue can affect more than just unlocking the phone, because biometric authentication is also used to access protected apps and other secure features. For users who rely on their iPhones to manage smart-home devices, an unexpected restart can temporarily disrupt access to those controls.
The Face ID crash was unusually specific
Apple says the iPhone 18 Pro and iPhone 18 Pro Max may unexpectedly restart when Face ID fails to authenticate. The company has not identified the internal cause or said how many phones were affected.
Reports before the update described a more specific sequence. Face ID could fail inside a protected app, then tapping “Try Face ID Again” could freeze touch input before the phone rebooted.
9to5Mac reproduced the behavior on an iPhone 18 Pro while authenticating the Passwords app. The report said the problem did not affect every device, supporting an intermittent software-bug description.
Protected apps made the failure matter
The issue seemed especially troublesome when Face ID protected more than just the lock screen. Examples included Apple’s Passwords app, private Safari tabs and other apps secured with biometric authentication.
That distinction matters because a failed biometric check typically has limited consequences. Instead of simply requesting another attempt, affected phones could become completely unresponsive and return to the lock screen.
ZDNET reported similar behavior, including a freeze during an app authentication attempt and another instance in which the iPhone fully restarted. The available reports indicate inconsistent reproduction rather than a universal failure.
Why iPhone 18 Pro is different
The iPhone 18 Pro generation introduced a redesigned Face ID arrangement. Apple moved the infrared camera beneath the display, helping reduce the visible area occupied by the Dynamic Island.
The infrared system still performs the familiar biometric job. It uses infrared sensing and facial-depth information to determine whether the person seeking access matches the enrolled Face ID profile.
That hardware change does not establish that the sensor itself is defective. Apple is addressing the documented restart condition in iOS, while early reports described Face ID operation as generally normal.
Apple did not blame the new hardware
The connection between the redesigned sensor and the crash remains an inference, not an Apple-confirmed explanation. A new hardware configuration can create software paths that were not previously exercised in the same way.
Apple’s release notes stop at the observable behavior, saying affected Pro models may restart when Face ID authentication fails. They provide no engineering explanation, prevalence estimate, or indication that hardware replacement is required.
The camera fix targets rare conditions
iOS 27.0.1 also fixes a color artifact that could appear in photos captured at 2x under certain lighting conditions at f/1.48. Apple says it affected a small number of iPhone 18 Pro and Pro Max devices.
The issue involves a specific combination of crop, aperture, and lighting. That makes it considerably narrower than a general camera-quality problem affecting every photograph taken with the Pro models.
The 2x mode also should not be confused with the dedicated telephoto camera. It can use the main camera sensor to create a shorter-telephoto perspective, putting additional demands on image processing.
Variable aperture adds another layer
The iPhone 18 Pro main camera uses a 48-megapixel Fusion system with a variable f/1.48 to f/4.0 aperture. Apple also lists 48-megapixel ultra-wide and telephoto cameras in the Pro camera system.
Apple does not describe the exact appearance of the corrected artifact. Reports have characterized it as unwanted color fringing or discoloration under particular conditions, pointing to image-processing behavior rather than a change in the physical lens.
Little-known fact: The variable aperture is built from six laser-cut blades, each thinner than a human hair.
A separate touchscreen bug affects more
The third documented fix is broader. Apple says opening Notification Center and Control Center simultaneously could make the touchscreen unresponsive while using supported iPhones running iOS 27.
Unlike the Face ID and camera fixes, Apple does not restrict this touchscreen problem to iPhone 18 Pro models. It therefore matters to users who stayed with older supported iPhones after installing iOS 27.
The bug appears connected to an unusual interface state involving the two system panels. Apple has not provided a detailed technical explanation, so the precise gesture sequence behind the failure remains unclear.
What iOS 27.0.1 changes
This is fundamentally a bug-fix release, not a major feature update. Apple released it on September 28, shortly after iOS 27 became available, following reports of problems affecting some newly released hardware.
Apple’s official list contains three specific fixes, covering Face ID restarts, the 2x camera artifact, and touchscreen lockups involving Notification Center and Control Center system panels.
The update supports all iPhone models compatible with iOS 27, though only some fixes target the iPhone 18 Pro generation and its new hardware.

Smart-home users have another reason
A frozen phone can interrupt more than ordinary smartphone tasks. Many smart-home systems rely on an iPhone for authenticated access to security cameras, smart locks, alarms, home hubs, and protected apps.
That makes stability especially relevant for households using the phone as a control point. A restart during an authentication attempt could temporarily prevent access when a user expects biometric security to work normally.
iOS 27 also expands Home-related capabilities, including activity summaries and descriptions for eligible security-camera recordings. As phones become more central to home monitoring, reliability becomes part of the overall smart-home experience.
How to install the update
Users can check for iOS 27.0.1 by opening Settings, selecting General, then choosing Software Update. The update can be downloaded and installed from that screen.
Connecting to Wi-Fi and power before installing is sensible, especially when battery life is limited. Apple does not promise that every possible cause of a restart will disappear completely.
For iPhone 18 Pro owners who experienced a Face ID freeze or unexpected restart, installing the update is particularly relevant. If restarts continue afterward, record the timing before contacting Apple Support.
The update shows why first releases matter
The iPhone 18 Pro combines new hardware with a major operating-system release, creating interactions that may not appear during ordinary testing. The Face ID failure illustrates how a narrow software condition can have a dramatic visible effect.
The rapid point release shows why maintenance updates matter when a problem affects only some owners. Apple shipped this corrective fix soon after reports emerged publicly online.
For consumers, the broader lesson is not that new iPhone hardware is inherently unreliable. It is that major design changes can introduce software edge cases, and timely maintenance releases can contain their impact.

TL;DR
- Apple’s iOS 27.0.1 update fixes an intermittent Face ID failure that could freeze and restart some iPhone 18 Pro models.
- The update also corrects a rare 2x camera color artifact and a touchscreen lockup involving Notification Center and Control Center.
- Apple has not disclosed the underlying cause or prevalence, so the evidence does not establish a hardware defect affecting the redesigned Face ID system.
- Smart-home users can benefit from the stability fixes because iPhones increasingly provide authenticated access to cameras, locks, alarms, and other protected controls.
This article was made with AI assistance and human editing.
If you liked this, you might also like:
Trending Products
iRobot Roomba Plus 405 (G181) 2in1 ...
Tipdiy Robot Vacuum and Mop Combo,4...
iRobot Roomba 104 2in1 Vacuum &...
Tikom Robot Vacuum and Mop Cleaner ...
ILIFE Robot Vacuum
T2280+T2108
ILIFE V5s Pro Robot Vacuum and Mop ...
T2353111-T2126121
Lefant Robot Vacuum Cleaner M210, W...
