BR151 Robot Vacuum Replacement Parts, Compatible with MAMNV BR151,ZCWA BR151,XIEBro BR151,iMartine BR151,ONSON BR151,MANVN BR151,ZC WAS BR151,MANVINS G20,Kilgone G20,8ea:Mop Pad,HEPA Filter,Side Brush

Product description

COMPATIBLE MODELS: These accessories compatible for MAMNV BR151, for ZCWA BR151, for MANVINS G20, for Kilgone G20, for MANVN BR151, for XIEBro Life BR151, for for iMartine BR151, for ZC WAS BR151, for ONSON BR151, for GOOVI BR151, for bObsweep Leaf 000-BR-150, for bObsweep Charlotte, for GTTVO BR151, for Tuya BR151 Robot Vacuum and Mop Combo
WORTHWHILE PACKAGE: Great value br151 robot vacuum replacement parts. You get 8 x BR151 side brushes (4 L/R pairs), 8 x BR151 HEPA filters (washable; 99.9% capture down to 0.1 µm), 8 x BR151 microfiber mop pads (machine-washable), and 1 x cleaning tool—this set has you covered for months. Pads are pre-shaped to fit the mop plate and stay flat—no bunching or curling. Filters rinse clean—just air-dry them fully (about 24 hours) before popping them back in. Plan on swapping parts about every 3 months (sooner with pets or heavy use)
EASY-INSTALL L/R SIDE BRUSH: Clear L/R letters line up with the robot mount—press down until it seats for a secure, no-wobble fit. Three-arm, longer bristles pull dust, crumbs, and pet hair from edges and chair legs into the intake, so it doesn’t fling debris around on wood or tile. Replace L/R as a pair to keep cleaning paths balanced
WASHABLE HEPA FILTER: The high-efficiency HEPA filter grabs up to 99.9% of fine dust, catching particles as small as 0.1 µm. That helps keep the airflow path clean and your suction steady, while also protecting the fan. It’s washable and reusable—just rinse with water and let it air-dry all the way (about 24 hours) before popping it back in. Check it now and then, and replace it if it looks worn or damaged
REUSABLE MICROFIBER MOP PADS: Tight-loop microfiber holds water and lets it out evenly to help cut streaks on wood, tile, or vinyl. Pre-shaped for the mop plate so it stays flat—no bunching or curling—and the hook-and-loop or clip mount keeps it in place while the robot runs. Wash by hand or machine on cold, then let it air-dry all the way (about 24 hours) before you pop it back on for long-lasting reuse